psb Imagine X1T

Artikelnummer: HD-009711
Kategorie: Standlautsprecher
Hersteller: PSB Speakers

3-Wege Standlautsprecher

599,00 €

inkl. 20% USt. ,

Verfügbarkeit bitte anfragen
Voraussichtliche Lieferzeit: 2 - 3 Werktage (AT - Ausland abweichend)

Stück

Beschreibung
Spezifikationen

Modest size, monumental performance

A deceptively thin and discreet floor standing speaker, the Imagine X1T has wide bandwidth and high SPL output capabilities that defy its small size. A seamless blend of design and hifi performance, the X1T is able to meet the demands of your multi-channel, or stereo setup. Capable, energetic and attractively priced, these speakers pack a mighty punch.

200 watts input power
1” (25mm) titanium dome with ferrofluid neodymium magnet
2 x 5¼” (133mm) clay/ceramic reinforced injection molded polypropylene cone woofers

Size-defying power
The Imagine X1T Tower is a dual-woofer transitional two-and-a-half way speaker with identical 5¼” (133mm) woofers that work together at the lowest frequencies but crossover at different frequencies to integrate better with room acoustics and give the best dispersion and power response. Imagine X models are all carefully matched in timbre, giving you the freedom to combine any of the models to work together in a variety of different rooms and system setups.

Dynamic accuracy
Like all woofers in the Imagine range, the cone materials have been carefully engineered for optimal control, allowing for a simpler, more cost effective crossover design. Tonal, spatial and dynamic accuracy are at the forefront of this speakers design which includes the Imagine one-inch titanium dome tweeter. The X1T fills the room with a refined mix of high and low frequencies that blend beautifully together.

Bring your space to life
Placement throughout the home is effortless thanks to the smart, minimalist design of these speakers and their small footprint. As the smallest floorstanders in the Imagine line up, the X1T’s can be easily incorporated into your space. Their modest size combined with a handsome cabinet design will suit any room and compliment many different system setups without any added clutter.

200 watts input power
1” (25mm) titanium dome with ferrofluid neodymium magnet
2 x 5¼” (133mm) clay/ceramic reinforced injection molded polypropylene cone woofers
Bass reflex (ported) design
Two sets of gold-plated five way binding posts can be bi-wired or bi-amped
Black ash vinyl finish

Angaben zur Produktsicherheit

Herstellerinformationen:

PSB Speakers

, ,
https://www.psbspeakers.com

verantwortliche Person:

Smartaudio GmbH
Zimmermanngasse 12
Burgenland
Wien, Österreich, 1090
office@smartaudio.at
https://www.smartaudio.at/doc

Frequency Response

On Axis @ 0° ±3dB

35-23,000Hz

On Axis @ 0° ±1 1/2dB

48-20,000Hz

Off Axis @ 30° ±1 1/2dB

48-10,000Hz

LF Cutoff -10dB

30Hz

Sensitivity

Anechoic Chamber

88dB

Listening Room

90dB

Impedance

Nominal

8 Ohms

Minimum

4 Ohms

Input Power

Recommended

20 – 200 Watts

Program

200 Watts

Acoustic Design

Tweeter (Nominal)

1” (25mm) Titanium Dome with Ferrofluid
Neodymium Magnet

Woofer (Nominal)

2 x 5 1/4” (133mm) Injection Moulded Clay/Ceramic reinforced
Polypropylene Cone
Rubber Surround / Dual Magnet

Crossover

1,800Hz, LR4, 800Hz

Internal Volume

1.42 cu ft (40.2L)

Design Type

Bass Reflex Front Port

Dimensions / Weights / Finish

Size (W x H x D)

8 1/4 x 34 1/2 x 15 5/8” *
208 x 874 x 395mm

Weight

Net – 38lb (17.3kg)/each
Shipping – 45.3lb (20.6kg)/each

Finish

Black Ash

Notes

* Non-metric measurements are approximate.
All specifications are subject to change without notice.